2500 ius HCG dosage in 1ml?

Allrite lads!
 
On week 5 of 12 weeks of this course:
 
500mg testex
200mg deca
 
Now I have finally gotten my HCG as the nuts need a boost - my vials are 2500ius per ml. Now, my question is - how should I take this i.e frequency etc - also, 2500ius seems like a lot, when I read on this forum 500 ius per week is ample etc???
 
Cheers lads,
 
 
T

Get some slin pins and make 5 x 500iu shots from each 2500iu mix mate.

Bigfella.

Forgive me for sounding like a complete tool - what's a slin pin? Dividing 1ml into 5 shots is gunna b difficult - can I not do them into 2 or 3 shots?

why 1ml. I use 2.5ml BAC water for 2500iu. Are you considering using the solvent which was delivered ? If so this is not a good idea as it will not keep in that solution. You need BAC water if you want to store for more than a few days. basically you can dispose of the solvent which is supplied with the kit.

You can get BAC water here (shop owned by Erekose a long time MT member and completely reliable)
http://ugm-supplies.com/Miscellaneous/30ml-Bacteriostatic-Water/prod_17.html

also you can get slin pins (insulin syringes) here:
http://ugm-supplies.com...with-Needle/prod_18.html
 
and you'll make life a lot easier if you get a couple of sterile glass vials to mix and store your HCG:
http://ugm-supplies.com...-Glass-Vial/prod_16.html

if using a glass vial what you do is:
use a normal barrel and long needle (yellow etc). Open the vial of HCG powder. Draw some bac water with the yellow (1ml will suffice). Gently inject the BAC into the vial with HCG. It will dissolve immediately. Then draw that solution back into the barrel with the yellow. Insert the yellow into the rubber stopper of the sterile barrel and inject the solution. Then draw another 1.5ml BAC water with the yellow and inject that into the glass vial. You now have 5x 0.5ml doses which will keep in the fridge for several weeks. Use the slin pin to draw 0.5ml and jab subq (pinch an inch in your ab area and insert the little needle at 45deg so it's in a little pocket between your skin and muscle.)
Read this :
http://www.fitnessuncovered.co.uk/injection-preperation-execution.php#subq 

^^very good info above mate

How often should I inject 500ius?

I was also under the impression that I could inject HCG IM rather than in the gut? If I have 2 shoot into the gut - I have to but if there's a choice, I'd rather not lol.
 
Thanks for the info above by the way - excellent stuff and I really appreciate you taking the time.
 
 

you can shoot either I/M or subq. You can even mix the HCG solution in the same barrel as an oil based hormone, they wont mix but you can shoot them together.

But subq is easy as pie, why the aversion ? You dont shoot into the gut but into the area under your skin. Did you watch the little video clip on the last link I posted ? If you jab solely HCG IM you will build up unnecessary scar tissue. But your call mate.

And concerning the dosage and frequency. There are many protocols. Some people jab larger doses others smaller doses frequently. Some run small doses throughout the whole cycle to prevent atrophy, others run it towards the end of the cycle before PCT to recover etc. Best search and get an idea of the various trains of thought. As it happens I'm nearing the end of a longer cycle. I ran HCG once mid cycle and now running again 2 weeks before end. I'm currently using 2 x2500iu into 10 500iu doses and using 500iu eod. But some people use 500iu ew etc. Also depends a lot on how shutdown you are etc.

Northern Rocker - you've been extremely helpful mate and given me a much better understanding, I really, really appreciate all the info.
 
I guess the idea of injecting subq puts me off from having seen many people inject growth this way and not do it in the correct manner and made it look horrible - it's just put me off doing it. LOL - a totally irrational reason, I know.

Big_TN


Northern Rocker - you've been extremely helpful mate and given me a much better understanding, I really, really appreciate all the info.
 
I guess the idea of injecting subq puts me off from having seen many people inject growth this way and not do it in the correct manner and made it look horrible - it's just put me off doing it. LOL - a totally irrational reason, I know.

its honestly painless and takes seconds mate, nothing to worry about at all.

Northern Rocker


why 1ml. I use 2.5ml BAC water for 2500iu. Are you considering using the solvent which was delivered ? If so this is not a good idea as it will not keep in that solution. You need BAC water if you want to store for more than a few days. basically you can dispose of the solvent which is supplied with the kit.

You can get BAC water here (shop owned by Erekose a long time MT member and completely reliable)
http://ugm-supplies.com/Miscellaneous/30ml-Bacteriostatic-Water/prod_17.html

also you can get slin pins (insulin syringes) here:
http://ugm-supplies.com/Syringes-Needles/Insulin-Syringes/1ml-BD-Insulin-Syringe-with-Needle/prod_18.html

and you'll make life a lot easier if you get a couple of sterile glass vials to mix and store your HCG:
http://ugm-supplies.com/Miscellaneous/10ml-Sterile-Glass-Vial/prod_16.html

if using a glass vial what you do is:
use a normal barrel and long needle (yellow etc). Open the vial of HCG powder. Draw some bac water with the yellow (1ml will suffice). Gently inject the BAC into the vial with HCG. It will dissolve immediately. Then draw that solution back into the barrel with the yellow. Insert the yellow into the rubber stopper of the sterile barrel and inject the solution. Then draw another 1.5ml BAC water with the yellow and inject that into the glass vial. You now have 5x 0.5ml doses which will keep in the fridge for several weeks. Use the slin pin to draw 0.5ml and jab subq (pinch an inch in your ab area and insert the little needle at 45deg so it's in a little pocket between your skin and muscle.)
Read this :
http://www.fitnessuncovered.co.uk/injection-preperation-execution.php#subq 

Thought I would re-ignite this as theres some good info and I have a further question. I follow to the point where you have the 2.5ml sitting in the sterile glass vial. The 1ml insulin pins I ordered from medisave come c/w 0.5 inch needles. This needle aint going to be long enough to reach the bottom of the sterile vial?
 
Thanks

Great posting NR very informative

Can anyone comment on using the slin pin to draw from the glass vial? The 0.5 inch needle doesnt seem to be big enough (been practising with an old test vial).
 
Cheers

Anyone!?

spot on posting NR.