Something of note for this thread: melanotan-1 (afamelanotide / Scenesse) has been approved for immediate prescribing and usage in Italy to treat EPP sufferers.

http://www.lifescientist....re-approval_win_italy/


It inclines one to think that there may be a licensed and regulated version on the market available for off-label prescription at some point in the not-too-distant future.

-Scott

am hopeing to start mt2 monday. hav 10mg. i am workin away from home and will not b able to jab nxt saturday. will this make a difference. do i need to jab every day or will it b ok to miss 1 day?

Melanotan


Something of note for this thread: melanotan-1 (afamelanotide / Scenesse) has been approved for immediate prescribing and usage in Italy to treat EPP sufferers.

http://www.lifescientist....re-approval_win_italy/


It inclines one to think that there may be a licensed and regulated version on the market available for off-label prescription at some point in the not-too-distant future.

-Scott

Thanks Scott. Always good to keep abreast of developments.

arfonj


will it b ok to miss 1 day?

This

Hi,

Thinking of doing 10mg of MT2 over the next 2 weeks before my holiday.

Do you think I'll have any issues with regards to laser tattoo removal I had done 3 weeks ago, skin has healed, seems to heal pretty quickly.

Also had small opp on shoulder, 2 very small scars (key hole) around cm long just over a month ago.

Cheers,

J

JimmyRosa


Do you think I'll have any issues with regards to laser tattoo removal I had done 3 weeks ago, skin has healed, seems to heal pretty quickly.

If it doesn't need further laser work then that should be fine.

Check with your laser technician though as I would have thought that there would be a period of a few weeks necessary before exposing the treated area to 'tanning'

I'll give them a call.

Any concern with the small scars you know of?

Cheers PB

J

JimmyRosa



Any concern with the small scars you know of?

 

No I'm riddled with them, and they're not small

Take extra care with new scarring, so perhaps factor 25+ them. Older scars need no special treatment. They may appear more red after exposure, but will blend better over time.

Hi, got 10mg of MT2

I want to take 0.25mg and need some help working out how much to draw into the slin pin? 

Im planning on adding 2ml of bac water so how much do i draw on the slin pin? it goes up to 100 on the markings  

Forget units for the time being. See if your barrel is rated at 0.5ml or 1ml.

2ml water mixed with 10mg = 5mg/ml

If it's 0.5ml, then you have 2.5mg of MTII when filled to the 100 line. So each line of 10 = 0.25mg

If it's a 1ml barrel, then you have 5mg of MTII when filled to the 100 line. So each line of 10 = 0.5mg (so for a dose of 0.25mg you would shoot half of a 10 line, so only 5 clicks).

Arrr i see its the 100ml barrels now that makes more sense!

Thanks mate ! 

P.s do i keep it refriderated and is it ok to shoot it from cold or does it need warming to body temp b4 a jab?

1 - Yes
2 - cold is fine

PartyBoy


Forget units for the time being. See if your barrel is rated at 0.5ml or 1ml.

2ml water mixed with 10mg = 5mg/ml

If it's 0.5ml, then you have 2.5mg of MTII when filled to the 100 line. So each line of 10 = 0.25mg

If it's a 1ml barrel, then you have 5mg of MTII when filled to the 100 line. So each line of 10 = 0.5mg (so for a dose of 0.25mg you would shoot half of a 10 line, so only 5 clicks).

Afternoon,
 
With regards to the 0.5ml pins and 2ml added isn't it, each line of 5 = 0.25mg as the 0.5ml pins only go up to the 50 line?
 
Just checking as I could only get hold of the 0.5ml pins, also just using 'sterile water for injections', this fine?
 
As I got the pins late and going away next Sat, I plan to do 0.25, then 0.50 the next day increasing at 0.25 every time up too 1mg untill I go as said in acticle. Is this worth doing still, will be in Ibiza so should get a nice dose of sunshine after.
 
Also plan to dose from the vial every jab, which I no might blunt the needle a bit, this ok with regards to sterie issues  too, I will use a alcohol wipe every time on the vial?
 
The vial I have was around 75% full of large crystals, this doesn't nessary mean it has filler does it, I know it go's through a freeze dry process which expands the peptide, but some people say if it is like this is, than it's more than likely to have filler in it?
 
Cheers,
J
 

Bump

PB,

Could you clarify this?

Cheers,

J

Anyone?

Sorry to go on!

J

JimmyRosa


With regards to the 0.5ml pins and 2ml added isn't it, each line of 5 = 0.25mg as the 0.5ml pins only go up to the 50 line?

If you still intend to mix the 10mg with 2ml of water then it is 5mg/ml. Your barrel is 0.5ml, so filled up will contain 2.5mg MT. If it is marked to 50 then each 10 will be 0.5mg, therefore a dose of 0.25mg is 5 clicks.

also just using 'sterile water for injections', this fine?

yes

As I got the pins late and going away next Sat, I plan to do 0.25, then 0.50 the next day increasing at 0.25 every time up too 1mg untill I go as said in acticle. Is this worth doing still

Yes

Also plan to dose from the vial every jab, which I no might blunt the needle a bit, this ok with regards to sterie issues  too, I will use a alcohol wipe every time on the vial?

Yes

The vial I have was around 75% full of large crystals, this doesn't nessary mean it has filler does it, I know it go's through a freeze dry process which expands the peptide, but some people say if it is like this is, than it's more than likely to have filler in it?
 

No idea tbh. Have a look around www.melanotan.org for clarification

Thanks PB, appreciated.

Slightly mixed opinions, but seems more than likely to be the lyophilized process, freeze drying.

I'll have to see how I get on.

Cheers,
J

Melanotan 11 nasal sprays. I assume they must work yes? Only downside is the price. Anyone here tried them, asking as family member wants to try it and wont consider injecting.

dementia


Melanotan 11 nasal sprays. I assume they must work yes? Only downside is the price. Anyone here tried them, asking as family member wants to try it and wont consider injecting.

 
Can't remember any sources from the top of my head but most things I have read consider them to be a waste of time and money