injecting peptides with 1ml syringe

i started ghrp6 on the 10th and dosing at 100mcg, 3 times daily.
 
i added 2.5ml Bac water to 5mg, therefore 5 ticks measures 100mcg
 
but, in less than a week of doing this the ghrp6 is almost gone, so its lasted less than half the time expected.. i've only just realised that i have been throwing away just over 100mcg everytime i jab it due to ghrp that remains in the tip of the syringe after the plunger thing goes flush with the end of the barrel, so i pulled it back this morning after i injected and there was about 6 ticks worth of ghrp.
 
the only way i was able to get this out was by pushing air out with it.
 
am i being stupid here, isit okay to start putting 0.5ml into a barrel and just change needles everytime i inject the 100mcg and just store the needle in the fridge as i don't know how i'm meant to get it out.
 
iv done abit of looking but seen nothing on it and i don't want to carry on wasting my peptides

Hi mate if you had 5mg of powder and you added 2.5ml of bac then 100mcg would be 3 tick marks or 5iu
 
But more than likley and ive seen it many times is you are loosing half of it in the end of the syringe 
 
You need to be using insulin syringe http://www.medisave.co.uk/terumo-syringe-1ml-insulin-u100-with-29g-x-05-needle-x100-p-99565.html
 
 

thoon, appreciate the reply, as always.
 
i've probably worded wrong but maybe not. (1st time iv injected)
 
i'm using a 1ml syringe without needle, the ghrp is 2000mcg / 1ml, so i've been drawing it up to 0.05ml - which i worded with 5 ticks but im guessing you refer to this as 5IU. if not, then correct me if i'm wrong, but i expected 50 jabs doing it this way (20 per 1ml syringe)
 
is there any way of avoiding buying the needles and using the seperate needles and syringes i've got? would keeping the ghrp in the barrel work if i were to replace the insulin needle each time?
 
if not i'll have to order them which is just an added monthly expense. thanks for the link too

1st, I'm not sure I understood this correctly "the ghrp is 2000mcg / 1ml" you mean its a vial with 5mg and you ixing it with 2.5ml BAC means its mixed to 2mg/1ml ? If so all is well till now.
 
As you want 100mcg per shot you'll get 50 shots from 5mg
 
So you need to divide your BAC mix by 50 to get 100mcg
 
On my 1ml slin pins I have markings of 40iu, so 2.5 ml eq 100iu. so a 100mcg shot is 100iu/50 = 2iu
 
On your 1ml barrel you'll have markings of 100ml which we can just consider as 100iu for all purposes, so 2.5ml eq 250iu hence a 100mcg shot is 250iu/50 = 5iu
 
so your own maths is correct. So now it's just a case of the amount left in the neck. Barring buying slin pins (which is def what I would do, but I admit costly). the only idea would be to add air after the shot to empty the neck but then you're not really measuring any more but guessing whats in the neck. So Your idea of drawing 1ml and changing pins would be ok if you measure your shot looking from TOP of markings, ie first shot will go from 100ml to 95, next 95 to 90 and so on.
 
Will be fine, just dont aspirate :)

Oaken


1st, I'm not sure I understood this correctly "the ghrp is 2000mcg / 1ml" you mean its a vial with 5mg and you ixing it with 2.5ml BAC means its mixed to 2mg/1ml ? If so all is well till now.

As you want 100mcg per shot you'll get 50 shots from 5mg

So you need to divide your BAC mix by 50 to get 100mcg

On my 1ml slin pins I have markings of 40iu, so 2.5 ml eq 100iu. so a 100mcg shot is 100iu/50 = 2iu

On your 1ml barrel you'll have markings of 100ml which we can just consider as 100iu for all purposes, so 2.5ml eq 250iu hence a 100mcg shot is 250iu/50 = 5iu

so your own maths is correct. So now it's just a case of the amount left in the neck. Barring buying slin pins (which is def what I would do, but I admit costly). the only idea would be to add air after the shot to empty the neck but then you're not really measuring any more but guessing whats in the neck. So Your idea of drawing 1ml and changing pins would be ok if you measure your shot looking from TOP of markings, ie first shot will go from 100ml to 95, next 95 to 90 and so on.

Will be fine, just dont aspirate :)

thanks for the reply Oaken.
 
yeah i was planning on doing as you said and just counting down from the top, aslong as this is fine i'll do this until i've got abit more money spare as getting a decent amount of cjc and AAS for 1st cycle are more important than needles (if i can get away without them)
 
the 2000mcg/1ml was just me simplifying the 5000mcg/2.5ml as was talking about the 1ml syringe haha i'm sure the maths is right though, so it looks as though i've been throwing away half of the peptide and not injecting twice as much as i was expecting 50 shots as you've said.
 
thanks again
 
 

Them syringes are very cheep mate invest in some it will cost you less in the long run with the amount of Ghrp you are wasting  .
 
There are places you can buy them singly if you don't want 200 pins  

true,
 
just an extra expense i hadnt accounted for thats all.
 
cheers